LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (2HO) >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
    4. Fig 1: Generator Positive Cable Nut And Nut
    GM2757769Courtesy of GENERAL MOTORS COMPANY
  4. Remove the generator positive cable fastener (1) and the generator positive cable (3).
  5. Disconnect the generator wiring harness connector (2).
    6. Fig 2: Generator Bolts
    GM2027790Courtesy of GENERAL MOTORS COMPANY
  6. Remove the 2 generator fasteners (2).
  7. Remove the generator (1).
scientia non olet · About LEMON Manuals