LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0710 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Steering Wheel Angle parameter corresponds to the actual steering wheel position as the steering wheel is turned through its entire range of motion.
    • If the parameter does not correspond with the steering wheel position or the reading is erratic 

      Refer to Circuit/System Testing below.

    • If the parameter reading corresponds with the steering wheel position 
  3. All OK.