LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Disc Brake System) >> Repair Instructions >> Rear Brake Backing Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Brake Dust Warning .
  1. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  2. Turn the ignition to the OFF position.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Remove the park brake shoes. Refer to Parking Brake Shoe Replacement .
    6. Fig 1: Identifying Parking Brake Actuator
    GM2230124Courtesy of GENERAL MOTORS CORP.
  6. Remove the parking brake actuator (1). Refer to Parking Brake Actuator Replacement .
  7. Remove the rear wheel bearing and hub assembly. Refer to Rear Wheel Bearing and Hub Replacement .
    8. Fig 2: View Of Rear Disc Brake Backing Plate
    GM2230126Courtesy of GENERAL MOTORS CORP.
  8. Remove the rear disc brake backing plate (1).
scientia non olet · About LEMON Manuals