LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C0450 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the VES actuator.
  2. Test for 5-10 ohms between the control terminals 1 and 2.
    • If not within the specified range, replace the VES actuator.
  3. Test for infinite resistance between each terminal and the VES actuator housing/case.
    • If not the specified value, replace the VES actuator.