LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Spark LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls And Fuel - 1.2L - Repair Instructions) >> Repair Instructions >> Fuel Tank Replacement (LFM) >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel tank heat shield. Refer to Fuel Tank Heat Shield Replacement (LL0) , Fuel Tank Heat Shield Replacement (LFM) .
  2. Install the fuel pump (5). Refer to Fuel Tank Fuel Pump Module Replacement (LL0) , Fuel Tank Fuel Pump Module Replacement (LFM) .
  3. Install the evaporative emission canister (4). Refer to Evaporative Emission Canister Replacement (LL0) , Evaporative Emission Canister Replacement (LFM) .
    4. Fig 1: Evaporative Emission Canister Purge Pipe
    GM3415999Courtesy of GENERAL MOTORS COMPANY
  4. Install the fuel tank feed pipe (3).
  5. Connect the fuel tank vent pipe connector (2).
  6. Install the evaporative emission canister purge pipe (1).
scientia non olet · About LEMON Manuals