LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Spark LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive and Negative Cable Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    4. Fig 1: Body Wiring Master Harness Connector
    GM2753179Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the body wiring master harness connector (1) from the battery positive cable junction block.
  5. Remove the battery. Refer to Battery Replacement .
    6. Fig 2: Positive Battery Cable Nut
    GM2753182Courtesy of GENERAL MOTORS COMPANY
  6. Remove the junction block cover.
  7. Remove the relay box cover.
  8. Remove the positive battery cable nut (1) from the junction block.
  9. Remove the positive battery cable nut (2) from the relay box.
  10. Remove the positive battery cable (3) from the junction block and relay box.
  11. Remove the battery tray. Refer to Battery Tray Replacement .
    12. Fig 3: Battery Negative Cable Frame Ground Bolt
    GM2753184Courtesy of GENERAL MOTORS COMPANY
  12. Remove the battery negative cable frame ground bolt (1).
  13. Remove the battery negative cable (2).
  14. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  15. Remove the exhaust front pipe assembly. Refer to Exhaust Front Pipe Replacement .
    16. Fig 4: Battery Positive And Negative Cable
    GM2753187Courtesy of GENERAL MOTORS COMPANY
  16. Remove the starter solenoid B (+) nut (1).
  17. Remove the generator B (+) nut (2).
  18. Remove the battery negative cable frame ground bolt (3).
  19. Remove the battery positive and negative cable (4) from the vehicle.
scientia non olet · About LEMON Manuals