Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
.
Courtesy of GENERAL MOTORS COMPANY
- If equipped with the electrical power steering, remove the radiator surge tank mounting bolts (1), and detach the radiator surge tank without disconnecting the coolant hose, and position it aside to get a hand access. If equipped with the hydraulic power steering, remove the radiator surge tank mounting bolts (1) and the power steering fluid reservoir mounting bolts (2), and detach the radiator surge tank and power steering fluid reservoir without disconnecting the coolant hose and the power steering hose, and position aside. Refer to Radiator Surge Tank Replacement
, and
.
Courtesy of GENERAL MOTORS COMPANY
- Disconnect the wheel speed sensor electrical connector (1).
Courtesy of GENERAL MOTORS COMPANY
- Detach the wheel speed sensor harness from the body frame mounted bracket (1).
- Detach the wheel speed sensor harness from the front strut mounted bracket (2).
Courtesy of GENERAL MOTORS COMPANY
- Remove the wheel speed sensor to knuckle retaining bolt (1).
- Remove the wheel speed sensor (2) from the steering knuckle.