Circuit/System Verification

Verify DTC C0277 is not set in the K9 Body Control Module.
- If DTC is set
  Refer to DTC C0277 or C0890 .
- If DTC is not set
Ignition ON
Verify the scan tool Body Control Module Brake Pedal Position Sensor Learned Released Position is YES.
- If the released position is not YES
  Perform the Brake Pedal Position Sensor Learn. Refer to Brake Pedal Position Sensor Calibration .
- If the released position is YES
Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
- If the DTC sets
  Replace the K17 Electronic Brake Control Module.
- If the DTC does not set
All OK.