Component Testing
WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Ignition OFF, disconnect the S78 Turn Signal/Multifunction Switch harness connector. S78 Turn Signal/Multifunction Switch in flash position, test for less than 5 Ω between terminal 4 and terminal 3.
- If greater than the specified value, replace the S78 Turn Signal/Multifunction Switch.
- S78 Turn Signal/Multifunction Switch in high beam position, test for less than 5 Ω between terminal 2 and terminal 3.
- If greater than the specified value, replace the S78 Turn Signal/Multifunction Switch.