Component Testing
WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Ignition OFF, disconnect the S30 Headlamp Switch harness connector. Turn the S30 Headlamp Switch in OFF position, test for less than 5 Ω between the terminal 6 and terminal 5.
- If greater than the specified value, replace the S30 Headlamp Switch.
- Turn the S30 Headlamp Switch in PARK position, test for less than 5 Ω between the terminal 6 and terminal 3.
- If greater than the specified value, replace the S30 Headlamp Switch.
- Turn the S30 Headlamp Switch in low beam position, test for less than 5 Ω between the terminal 6 and terminal 4.
- If greater than the specified value, replace the S30 Headlamp Switch.