LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Fuse Block Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install fuse block.
    2. CAUTION: Refer to Fastener Caution
  2. Install body wiring harness and 2 body wiring harness nuts.

    Tighten::  4.7 N.m (42 lb in) 

  3. Install the positive battery cable. Refer to Battery Positive Cable Replacement
    4. Fig 1: View Of Fuse Box Cover, Battery Cable And Nut
    GM2027594Courtesy of GENERAL MOTORS CORP.
  4. Install the positive battery cable to starter (3).
  5. Install the positive battery cable to starter nut (2).

    Tighten:: 9 N.m (80 lb in) 

  6. Close the battery fuse box cover (1) and lock the retaining tabs on the battery fuse box.
  7. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals