LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wiring Harness Supply, Front Compartment Fuse Block And Electrical Connectors
    GM2191907Courtesy of GENERAL MOTORS CORP.
  1. Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in)  .
    3. Fig 2: Identifying Front Compartment Fuse Block Bolt
    GM2191908Courtesy of GENERAL MOTORS CORP.
  3. Install 3 front compartment fuse block bolt (1) and tighten to 6 N.m (53 lb in)  .
  4. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals