LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 1.4L (LUV) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    2. Fig 1: Camshaft Position Sensor Wiring Harness Plug
    GM2191800Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Graphic shows exhaust camshaft position sensor. Use same procedure for Intake camshaft position sensor.

  2. Disconnect the camshaft position sensor wiring harness plug (1).
    3. Fig 2: Camshaft Position Sensor
    GM2191799Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Graphic shows exhaust camshaft position sensor. Use same procedure for Intake camshaft position sensor.

  3. Remove the camshaft position sensor bolt (3).
  4. Remove the camshaft position sensor (2) and the seal ring (1).
scientia non olet · About LEMON Manuals