LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive and Negative Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Battery Positive Cable, Nut & Generator Electrical Connector
    GM2498499Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the battery positive cable (3) to the back of the generator and tighten nut (2) to 20 N.m (15 lb ft).
    2. Fig 2: Battery Negative Cable Stud & Starter Solenoid Nut
    GM2534851Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery positive cable (3) to the starter solenoid and tighten nut (2) to 12 N.m (9 lb ft).
  3. Install the battery negative cable to the starter and tighten the stud/nut (1) to 25 N.m (18 lb ft).
  4. Install the drivetrain and front suspension frame skid plate. Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement .
    5. Fig 3: Battery Negative Cable & Nut
    GM2552157Courtesy of GENERAL MOTORS COMPANY
  5. Install the battery negative cable nut (1) and the battery negative cable (2), to the chassis frame stud and tighten to 22 N.m (16 lb ft).
    6. Fig 4: Battery Positive Cable & Nut
    GM2498501Courtesy of GENERAL MOTORS COMPANY
  6. Install the battery positive cable (2) to the battery positive cable extension cable junction block and tighten nut (1) to 12 N.m (9 lb ft).
  7. Install the battery tray. Refer to Battery Tray Replacement .
  8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  9. Install the fuse block and battery positive cable cover.
scientia non olet · About LEMON Manuals