LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Malibu LS >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Repair Instructions >> Electronic Parking Brake Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Block the drive wheels.
  2. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling 
  3. Place the ignition in the OFF position.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  5. Remove the left rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  6. Remove the left rear wheelhouse liner. Refer to Rear Wheelhouse Liner Replacement .
    7. Fig 1: Parking Brake Rear Cable Nut
    GM2560882Courtesy of GENERAL MOTORS COMPANY
  7. Disconnect the parking brake rear cable nut (1).
  8. Disconnect the electronic parking brake control module electrical connector.
    9. Fig 2: Electronic Parking Brake Control Module Nuts
    GM2560883Courtesy of GENERAL MOTORS COMPANY
  9. Remove the electronic parking brake control module nuts (1).
  10. Remove the electronic parking brake control module.
scientia non olet · About LEMON Manuals