LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Anti-Lock Brake System And Traction Control System) >> Diagnostic Information and Procedures >> DTC C0179 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Allow the brakes to cool down before performing this test.
  1. With scan tool clear the DTC.
  2. With scan tool connected test drive the vehicle under normal braking conditions and without causing TCS or ABS activation. Verify DTC C0179 does not reset.
    • If DTC C0179 resets, replace the EBCM.
  3. Refer to Diagnostic Aids .