LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LS >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Shift Lever Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Shift Lever, Seal (Boot), Screw & Upper Trim Cover
    GM419648Courtesy of GENERAL MOTORS COMPANY
  1. Engage the shift lever (4) to the linear shift assembly.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the shift lever screw (3) to the shift lever (4) and tighten it to 20 N.m (15 lb ft).
  3. Connect the shift lever electrical connector at the base of the steering column.
  4. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
scientia non olet · About LEMON Manuals