LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LS >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Fluid Cooler Replacement >> Removal Procedure

Removal Procedure

  1. Place drain pans under the vehicle.
  2. Remove as much power steering fluid from the reservoir as possible.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the radiator air lower baffle and deflector. Refer to Radiator Air Lower Baffle and Deflector Replacement .
    5. Fig 1: Power Steering Fluid Cooler And Pipe
    GM2635453Courtesy of GENERAL MOTORS COMPANY
  5. Loosen the 2 hose clamps and disconnect the power steering fluid cooling pipe (1, 4) from the power steering fluid cooler (2, 3).
    6. Fig 2: Power Steering Fluid Cooler, Retainer And Bolt
    GM2636426Courtesy of GENERAL MOTORS COMPANY
  6. Remove the bolt (2) from the power steering fluid cooler (1).
  7. Disconnect the retainer (3) and the power steering fluid cooler from the front end lower tie bar.
    8. Fig 3: Power Steering Fluid Cooler And Bolt
    GM2636574Courtesy of GENERAL MOTORS COMPANY
  8. Remove the bolt (2) from the power steering fluid cooler (1).
    9. Fig 4: Power Steering Fluid Cooler
    GM2637072Courtesy of GENERAL MOTORS COMPANY
  9. Remove the power steering fluid cooler (1) from the vehicle.
scientia non olet · About LEMON Manuals