LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Shift Interlock System) >> Diagnostic Information and Procedures >> Scan Tool Data List

Scan Tool Data List

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position.
Shift Lock Control Data Inactive Active
Engine Control Module (ECM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position.
Ignition Voltage Transmission Data Volts 0-25v
IMS A/B/C/P Transmission Data Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, Invalid, Open Park
TCC Brake Switch Transmission Data ON/OFF OFF