Digital Radio Receiver Replacement

Fig 1: Digital Radio Receiver

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the right rear compartment trim. Refer to Rear Compartment Side Trim Replacement - Right Side .
1	Digital Radio Receiver Bracket Nut (Qty: 2) CAUTION: Refer to Fastener Caution . TIP: Disconnect the antenna and electrical connectors from the module. Tighten 3.5 N.m (31 lb in)
2	Digital Radio Receiver Assembly Remove the nuts that retain the receiver to the bracket. If a replacement receiver is installed, perform the Digital Radio Receiver Setup. Refer to Control Module References . Do not swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock. "XM Theftlock" will be displayed. Tighten 5 N.m (44 lb in)