LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Diagnostic Information and Procedures >> DTC B1420 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate door module.
  2. Ignition ON, test for 9.6-13.6 volts between the B+ circuit terminal 20 and ground.
    • If less than the specified range, test the B+ circuit for a an open/high resistance. If the circuit tests normal, replace the door module.
    • If the circuit tests normal and the system voltage is less than or greater than the specified range, refer to Charging System Test .
scientia non olet · About LEMON Manuals