LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Caprice 3.6L Eng VIN 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Pump Flow Control Module And Battery Tray
    GM2290952Courtesy of GENERAL MOTORS COMPANY
  1. Attach the fuel pump flow control module (1) to the battery tray (3).
  2. Attach the fuel pump flow control module retainers (4).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the fuel pump flow control module to battery tray underside retaining nut (2) and tighten to 9 N.m (80 lb in).
  4. Install the battery tray. Refer to Battery Tray Replacement .
  5. Program the fuel pump control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals