Fuel Pipe Shield Replacement

Fig 1: Fuel Pipe Shield & Retaining Bolt

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (Lower Panel) , Air Inlet Grille Panel Replacement (Upper Panel) .
1	Fuel Pipe Shield Retaining Bolt CAUTION: Refer to Fastener Caution . Tighten 10 (89 lb in)
2	Fuel Pipe Shield Procedure Unclip the wire harness from the shield and reposition. Remove the noise insulator along with the fuel pipe shield.

Callout

Component Name

Fuel Pipe Shield Retaining Bolt

CAUTION:

Tighten
10 (89 lb in)

Fuel Pipe Shield

Procedure