LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Caprice 3.6L Eng VIN 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying CKP Sensor To Engine Block Retaining Bolt
    GM1949785Courtesy of GENERAL MOTORS COMPANY
  1. Install the CKP sensor (2) to the engine block.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the CKP sensor to engine block retaining bolt (1) and tighten to 10 (89 lb in).
    3. Fig 2: Identifying CKP Electrical Connector
    GM1949783Courtesy of GENERAL MOTORS COMPANY
  3. Connect the CKP electrical connector (3) to the CKP sensor.
  4. Lower the vehicle.
  5. Perform the crankshaft position sensor learn procedure. Refer to Control Module References .
scientia non olet · About LEMON Manuals