Adjustment Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Before performing any adjustment affecting the wheel alignment, refer to Wheel Alignment Measurement .
Loosen the strut to the knuckle bolts. Refer to Strut Assembly Replacement .

Fig 1: Front Camber

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Adjust the front camber (1) and tighten the strut-to-knuckle nuts to 80 N.m (59 lb ft) plus 180 degrees.

NOTE: After adjusting the front camber, it is necessary to adjust the front toe.

Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .