LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> OnStar Microphone Malfunction >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure is not used in Brazil.
  1. Ignition OFF, disconnect the harness connector at the cellular microphone.
  2. Ignition OFF, test for less than 5 Ω between the low reference circuit terminal A and ground.
    • If greater than the specified range, test the low reference circuit for an open/high resistance. If the circuit tests normal, replace the CIM.
  3. Ignition ON, test for 9-11 V between the signal circuit terminal B and ground.
    • If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the CIM.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the CIM.
  4. If all circuits test normal, replace the cellular microphone.