LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Wiring Systems And Power Management - Component Connector End Views - E7R Through K36) >> Component Connector End Views >> K9 Body Control Module X7 Connector End View

K9 Body Control Module X7 Connector End View

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: K9 Body Control Module X7 Connector End View
GM2282920Courtesy of GENERAL MOTORS CORP.
K9 Body Control Module X7

Pin Wire Circuit Function
1 0.5 GY 157 Courtesy Lamp Control
2 - - Not Used
3 0.5 L-GN 24 Backup Lamp Supply Voltage
4-5 - - Not Used
6 0.35 TN 7553 Automatic Transmission Shift Lock Control Solenoid Control (MYB/MYC)
7 0.5 OG/BK 737 Rear Compartment Lamp Control
8 - - Not Used
9 0.5 YE 6817 LED Backlight Dimming Control
10-14 - - Not Used
15 0.35 D-GN 3270 Driver Door Lock Status Signal
16-18 - - Not Used
19 0.35 WH 156 Courtesy Lamp Switch Signal
20-26 - - Not Used
Connector Part Information 
  • Harness Type: Instrument Panel
  • OEM Connector: 13594132
  • Service Connector: 19151265
  • Description: 26-Way F 0.64 2.8 Series (GY)
Terminal Part Information 
  • Pins: 1, 3
  • Terminated Lead: 13327199
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: E/A
  • Pins: 6, 7, 9, 15, 16, 19, 21
  • Terminated Lead: 13575870
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
scientia non olet · About LEMON Manuals