K9 Body Control Module X6 Connector End View

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K9 Body Control Module X6 Connector End View

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X6

Pin	Wire	Circuit	Function
1	1 GY	5911	Driver Door Lock Motor Unlock Control
2	2 GY	295	Door Lock Actuator Unlock Control
3	2 BK	1650	Ground
4	2 TN	294	Door Lock Actuator Lock Control
5	0.35 PK/BK	1303	Rear Compartment Lid Ajar Switch Signal
6	-	-	Not Used
7	0.35 PU	7558	Accent Lamps Control (SRK/SRM)
8-9	-	-	Not Used
10	0.35 D-GN	6134	Linear Interconnect Network 3
11-13	-	-	Not Used
14	0.35 D-BU	6189	Rear Compartment Lid Release Switch
15	-	-	Not Used
16	0.35 BN	6132	Linear Interconnect Network 1 (CF5)
17-23	-	-	Not Used
24	0.35 TN/BK	2500	High Speed GMLAN Serial Data Bus+
25	0.35 TN	2501	High Speed GMLAN Serial Data Bus -
26-27	-	-	Not Used

Connector Part Information

Harness Type: Instrument Panel
OEM Connector: 13594134
Service Connector: 19151267
Description: 27-Way F 0.64 2.8 Series (PK)

Terminal Part Information

Pin: 1
Terminated Lead: 13327199
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A061T-M2.8/20
Core/Insulation Crimp: C/A

Pins: 2, 3, 4
Terminated Lead: 13575560
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A081T-M2.8/20
Core/Insulation Crimp: A/D

Pins: 5, 7, 10, 14, 16, 21, 24, 25
Terminated Lead: 13575870
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SNAC3-A021T-M0.64/20
Core/Insulation Crimp: J/J