K9 Body Control Module X5 Connector End View

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K9 Body Control Module X5 Connector End View

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X5

Pin	Wire	Circuit	Function
1	0.5 YE/BK	1334	Left Rear Turn Signal Lamp Supply Voltage
2	0.5 L-BU/WH	1314	Left Front Turn Signal Lamp Supply Voltage
3	0.8 RD/WH	3840	Battery Positive Voltage
4	3 RD/WH	3440	Battery Positive Voltage
5	-	-	Not Used
6	0.5 BN	5077	Low Reference
7	0.5 BN/GY	6995	Marker Lamps Control
8-9	-	-	Not Used
10	0.35 D-GN/WH	1317	Fog Lamp Relay Control
11	0.35 TN	6188	Rear Compartment Lid Release Control
12	0.35 L-BU/WH	6311	Brake Pedal Switch Signal
13	0.35 PK/WH	1970	HID Headlamp Relay Control
14-17	-	-	Not Used
18	0.5 TN/WH	1969	Headlamp High Beam Relay Control
19	0.35 TN	28	Horn Relay Control
20-23	-	-	Not Used
24	0.35 TN	860	Front Windshield Wiper Switch High Signal
25-26	-	-	Not Used

Connector Part Information

Harness Type: Instrument Panel
OEM Connector: 13594130
Service Connector: 19151264
Description: 26-Way F 0.64 2.8 Series (BN)

Terminal Part Information

Pins: 1-3
Terminated Lead: 13327199
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A061T-M2.8/20
Core/Insulation Crimp: E/A

Pin: 4
Terminated Lead: 13575560
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A081T-M2.8/20
Core/Insulation Crimp: A/D

Pins: 5-7, 10-13, 18, 19, 23, 24, 26
Terminated Lead: 13575870
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SNAC3-A021T-M0.64/20
Core/Insulation Crimp: J/J