K9 Body Control Module X4 Connector End View

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K9 Body Control Module X4 Connector End View

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X4

Pin	Wire	Circuit	Function
1	0.8 D-BU	7539	DRL Control
2	0.8 L-BU	7538	DRL Control
3	0.5 D-BU/WH	1315	Right Front Turn Signal Lamp Supply Voltage
4	0.5 D-GN/WH	1335	Right Rear Turn Signal Lamp Supply Voltage
5	0.5 BN/WH	309	Right Park Lamp Supply Voltage
6	0.5 PU	709	Left Park Lamp Supply Voltage
7	0.5 BN/L-BU	6993	Marker Lamps Control
8-10	-	-	Not Used
11	0.5 WH	5065	Center High Mounted Stop Lamp (CHMSL) Control
12	0.35 TN	755	RAP Relay Coil Control
13	0.5 D-GN/YE	6846	Rear License Lamp Control
14	0.35 OG	2268	Washer Fluid Pump Relay Control
15	0.35 YE	5199	Ignition Voltage
16	0.35 GY	91	Wiper Relay Control
17	0.35 YE	196	Windshield Wiper Motor Park Switch Signal
18	0.5 WH	5075	Current Sensor Signal
19	-	-	Not Used
20	0.5 RD/WH	2340	Battery Positive Voltage
21	0.5 PK	5076	Current Sensor Voltage
22	0.35 D-BU	5985	Serial Data Wake - Up Signal
23	0.35 L-BU	5986	Serial Data Communication Enable
24	0.35 PK/BK	109	Hood Ajar Switch Signal
25	-	-	Not Used
26	0.5 BK	2550	Ground

Connector Part Information

Harness Type: Instrument Panel
OEM Connector: 13594129
Service Connector: 19151263
Description: 26-Way F 0.64 2.8 Series (BK)

Terminal Part Information

Pins: 1-4
Terminated Lead: 13327199
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A061T-M2.8/20
Core/Insulation Crimp: E/A

Pins: 5-7, 9, 11-18, 20-24, 26
Terminated Lead: 13575870
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SNAC3-A021T-M0.64/20
Core/Insulation Crimp: J/J