LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Wiring Systems And Power Management - Component Connector End Views - E7R Through K36) >> Component Connector End Views >> K8 Blower Motor Control Module X1 Connector End View

K8 Blower Motor Control Module X1 Connector End View

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: K8 Blower Motor Control Module X1 Connector End View
GM1837860Courtesy of GENERAL MOTORS CORP.
K8 Blower Motor Control Module X1

Pin Wire Circuit Function
1-2 - - Not Used
3 0.35 GY/BK 754 Blower Motor Speed Control
4 - - Not Used
5 5 BK 1450 Ground
6 5 RD/BK 542 Battery Positive Voltage
Connector Part Information 
  • Harness Type: Instrument Panel
  • OEM Connector: 13520671
  • Service Connector: 88988512
  • Description: 6-Way F GT 150 6.3 Series (BK)
Terminal Part Information 
  • Pin: 3
  • Terminated Lead: 13575735
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: E/C
  • Pins: 5, 6
  • Terminated Lead: Pending
  • Release Tool: J-38125-11A
  • Diagnostic Test Probe: J-35616-42 (RD)
  • Terminal/Tray: 7116-4122-02/10
  • Core/Insulation Crimp: D/G
scientia non olet · About LEMON Manuals