Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inside Rearview Mirror

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Inside Rearview Mirror Set Screw CAUTION: Refer to Fastener Caution . Procedure Adjust the mirror to the full upward position. Loosen the set screw located at the base of the mirror. Slide the mirror upward off of the rearview mirror button. Tighten: 1.8 N.m (16 lb in)
2	Inside Rearview Mirror

Callout

Component Name

Inside Rearview Mirror Set Screw

CAUTION: Refer to Fastener Caution .

Procedure

Adjust the mirror to the full upward position.
Loosen the set screw located at the base of the mirror.
Slide the mirror upward off of the rearview mirror button.

Tighten: 1.8 N.m (16 lb in)

Inside Rearview Mirror