LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Lighting System) >> Diagnostic Information and Procedures >> DTC B3650 >> Component Testing >> Static Test

Static Test

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the S78 Turn Signal/Multi-Function Switch harness connector. S78 Turn Signal/Multi-Function Switch in flash position, test for less than 5 Ω between terminal 12 and terminal 6.
    • If greater than the specified value, replace the S78 Turn Signal/Multi-Function Switch.
  2. S78 Turn Signal/Multi-Function Switch in high beam position, test for less than 5 Ω between terminal 11 and terminal 6.
    • If greater than the specified value, replace the S78 Turn Signal/Multi-Function Switch.
scientia non olet · About LEMON Manuals