LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Lighting System) >> Diagnostic Information and Procedures >> DTC B3596 >> Component Testing >> Static Test

Static Test

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the S26 Hazard Lamps Switch.
  2. Test for infinite resistance between the S26 Hazard Lamps Switch terminal 1 and terminal 3.
    • If less than the specified value, replace the S26 Hazard Lamps Switch.
  3. Press the S26 Hazard Lamps Switch ON, test for less than 5 Ω between the S26 Hazard Lamps Switch terminal 1 and terminal 3.
    • If not within the specified range, replace the S26 Hazard Lamps Switch.
scientia non olet · About LEMON Manuals