LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Lighting System) >> Diagnostic Information and Procedures >> DTC B2625 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the S48B Multifunction Switch - Overhead Console.
  2. Connect a test lamp between the control circuit terminal 1 and ground.
  3. Command the LED Backlight Dimming ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always OFF, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K9 BCM.
    • If the test lamp is always ON, test the control circuit for a short to voltage. If the circuit tests normal, replace the K9 BCM.
  4. If all circuits test normal, test or replace the S48B Multifunction Switch - Overhead Console.
scientia non olet · About LEMON Manuals