LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radiator Inlet Hose And Radiator
    GM2375982Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator inlet hose to the vehicle.
  2. Install the radiator inlet hose (2) to the radiator.
  3. Install the radiator inlet hose clamp (1) at radiator using BO-38185:  Hose Clamp Pliers.
    4. Fig 2: Radiator Inlet Hose And Clamp
    GM2375983Courtesy of GENERAL MOTORS CORP.
  4. Install the radiator inlet hose (2) to the engine.
  5. Install the radiator inlet hose clamp (1) at engine using BO-38185:  Hose Clamp Pliers.
  6. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement
  7. Fill the cooling system. Refer to Cooling System Draining and Filling 
scientia non olet · About LEMON Manuals