Liftgate Latch Striker Replacement

Fig 1: View Of Liftgate Lock Striker & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement .
1	Liftgate Latch Striker Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Mark the location of the striker with a grease pencil to ensure proper alignment during installation. Tighten 25 N.m (18 lb ft)
2	Liftgate Latch Striker Procedure Adjust the liftgate if needed. Refer to Liftgate Adjustment .