Component Testing

Relay Test

1. Vehicle OFF, disconnect the KR95A liftgate unlatch relay.
2. Test for 60-200 Ω between terminals 44 and 48.
   • If less than 60 Ω or greater than 200 Ω 

     Replace the KR95A liftgate unlatch relay.

   • If between 60-200 Ω 
3. Test for infinite resistance between the terminals listed below:
   • 44 and 46
   • 44 and 45
   • 48 and 46
   • 48 and 45
   • If less than infinite resistance 

     Replace the KR95A liftgate unlatch relay.

   • If infinite resistance 
4. Install a 3 A fused jumper wire between relay terminal 44 and 12 V. Install a jumper wire between relay terminal 48 and ground.
5. Test for less than 2 Ω between terminals 46 and 45.
   • If 2 Ω or greater 

     Replace the KR95A liftgate unlatch relay.

   • If less than 2 Ω 
6. All OK