LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting System) >> Diagnostic Information and Procedures >> DTC B2580 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X5 harness connector at the K9 BCM.
  2. Ignition ON, test for greater than 10V between the control circuit terminal 18 and ground.
    • If less than the specified range, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the X50A underhood fuse block.
  3. If all circuits test normal, replace the K9 BCM.
scientia non olet · About LEMON Manuals