Tire Pressure Indicator Sensor Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tire Pressure Indicator Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Lifting and Jacking the Vehicle . Remove the tire and wheel assembly. Tire and Wheel Removal and Installation . Dismount the tire from the wheel. Tire Dismounting and Mounting .
1	Tire Pressure Indicator Sensor Bolt CAUTION: Refer to Fastener Caution . Procedures After removing the tire pressure indicator sensor bolt. Use a valve stem tool to remove and install the rubber valve stem. Perform the Tire Pressure Sensor Learn Procedure. Tire Pressure Indicator Sensor Learn NOTE: The words "This side up" are embossed on the sensor body to help with orientation. Tighten 1.4 N.m (12 lb in)

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Lifting and Jacking the Vehicle .
Remove the tire and wheel assembly. Tire and Wheel Removal and Installation .
Dismount the tire from the wheel. Tire Dismounting and Mounting .

Tire Pressure Indicator Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Procedures

After removing the tire pressure indicator sensor bolt. Use a valve stem tool to remove and install the rubber valve stem.
Perform the Tire Pressure Sensor Learn Procedure. Tire Pressure Indicator Sensor Learn

NOTE:

The words "This side up" are embossed on the sensor body to help with orientation.

Tighten
1.4 N.m (12 lb in)