LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Rear Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front lower control arm assembly. Refer to Lower Control Arm Replacement .
    2. Fig 1: View Of Lower Control Arm In Soft Jawed Vise
    GM1853578Courtesy of GENERAL MOTORS COMPANY
  2. Install the lower control arm in a soft jawed vise.
    3. Fig 2: Special Tools J 2619-01 & CH-48107
    GM1853579Courtesy of GENERAL MOTORS COMPANY
  3. Assemble the J 2619-01  Slide Hammer and Adapter and the CH-48107  Bushing Remover and Installer.
  4. Position the J 2619-01  Slide Hammer and Adapter and the CH-48107  Bushing Remover and Installer lower control arm bushing.
  5. Using the J 2619-01  Slide Hammer and Adapter and the CH-48107  Bushing Remover and Installer, remove the front lower control arm bushing.
    6. Fig 3: Special Tool J 5590
    GM1853576Courtesy of GENERAL MOTORS COMPANY
  6. Using the J 5590  Installer and Remover, remove the rear lower control arm bushing.
scientia non olet · About LEMON Manuals