Calibration Procedure
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the parking brake.
- Place the transmission in the PARK position.
- Install a scan tool.
- Clear all BCM DTCs before proceeding.
- Navigate to the Module Diagnosis menu.
- Select BCM menu item.
- Select Configuration/Reset Functions menu item.
- Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
- Perform the Engine Control Module (ECM) brake pedal position sensor calibration.