Information Center Telltale Assembly Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Information Center Telltale Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Information Center Telltale Assembly Bezel Procedure Position a flat bladed plastic trim tool between the headliner and the rear of the information center telltale assembly bezel to release the tab retaining the bezel to the headliner. Disconnect the electrical connector.
2	Parking Aid Monitor Module Procedure Pull the tabs outwards to release the module from the bezel.

Callout

Component Name

Information Center Telltale Assembly Bezel

Procedure

Position a flat bladed plastic trim tool between the headliner and the rear of the information center telltale assembly bezel to release the tab retaining the bezel to the headliner.
Disconnect the electrical connector.

Parking Aid Monitor Module
Procedure
Pull the tabs outwards to release the module from the bezel.