LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Object Detection System - Park Assist System) >> Diagnostic Information and Procedures >> Parking Assist System Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify the park assist system is enabled through the DIC.
    • If the park assist system is manually disabled, enable the system. Refer to the vehicle owners manual for instructions on enabling the system.
    2. NOTE:

    After completing the next step the vehicle might need to be driven at speed greater than 40 km/h (25 mph).

  2. Transmission in REVERSE, verify one audible beep sounds and the scan tool Park Assist System Status parameter is Enable.
    • If not the specified values, refer to Diagnostic Aids above and the scan tool Park Assist Disable History parameters to determine the cause of the inhibit.
scientia non olet · About LEMON Manuals