LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Rear Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front lower control arm assembly. Refer to Lower Control Arm Replacement .
    2. Fig 1: Lower Control Arm In Soft Jawed Vise
    GM1853578Courtesy of GENERAL MOTORS COMPANY
  2. Install the lower control arm in a soft jawed vise.
    3. Fig 2: Front Lower Control Arm Rear Bushing Replacement Tools
    GM1853579Courtesy of GENERAL MOTORS COMPANY
  3. Assemble the J 2619-01  Slide Hammer and Adapter and the CH-48107  Bushing Remover and Installer.
  4. Position the J 2619-01  Slide Hammer and Adapter and the CH-48107  Bushing Remover and Installer lower control arm bushing.
  5. Using the J 2619-01  Slide Hammer and Adapter and the CH-48107  Bushing Remover and Installer, remove the front lower control arm bushing.
    6. Fig 3: Control Arm Bushing Installer And Remover
    GM1853576Courtesy of GENERAL MOTORS COMPANY
  6. Using the J 5590  Installer and Remover, remove the rear lower control arm bushing.
scientia non olet · About LEMON Manuals