LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> DTC B0082 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the B60 seat belt reminder sensor.
  2. Test for less than 30 Ω between the ground circuit terminal 2 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance. If the circuit tests normal, replace the K36 SDM
  3. Ignition ON, test for 4.75-5.25 V between the signal circuit terminal 1 and ground.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K36 SDM.
    • If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the K36 SDM.
  4. If all circuits test normal, replace the B60 seat belt reminder sensor.
scientia non olet · About LEMON Manuals