LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Manifold Lower Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Exhaust Manifold Lower Heat Shield Bolts
    GM1839760Courtesy of GENERAL MOTORS COMPANY
  1. Position the exhaust manifold lower heat shield to the engine.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the exhaust manifold lower heat shield bolts (1, 2). Tighten bolt (1) to 10 N.m (89 lb in) and tighten bolt (2) to 50 N.m (37 lb ft).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals