LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> Cruise Control Switch Indicator Inoperative >> Circuit/System Testing

Circuit/System Testing

IMPORTANT:

Refer to DTC B3794  before performing this diagnostic, if this code is set as current or history.

  1. Ignition OFF, disconnect the harness connector at the steering wheel controls switch-left.
  2. Ignition ON, verify that a test lamp illuminates between the low reference circuit terminal 9 and B+.
    • If the test lamp does not illuminate, test the low reference circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the BCM.
  3. If all circuits test normal, test or replace the steering wheel controls switch-left.