LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Battery, Charging System And Starting System) >> Repair Instructions >> Engine Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Ground Strap & Bolt
    GM1702850Courtesy of GENERAL MOTORS COMPANY
  1. Remove the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Remove the engine ground strap nut at the front plenum panel.
  3. Remove the ground strap terminal from the stud.
    4. Fig 2: View Of Engine Ground Strap & Bolt
    GM1699550Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine ground strap bolt from the rear of the left cylinder head.
  5. Remove the ground strap from the vehicle.
scientia non olet · About LEMON Manuals