Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Control Arm to Steering Knuckle Bolt and Nut | ||
| First Pass | 30 N.m | 22 lb ft |
| Final Pass | 60-75 Degrees (1) | |
| Control Arm to Subframe Bolt and Nut- Front | ||
| First Pass | 70 N.m | 52 lb ft |
| Final Pass | 75-90 Degrees (1) | |
| Control Arm to Subframe Bolt and Nut- Rear | ||
| First Pass | 70 N.m | 52 lb ft |
| Final Pass | 75-90 Degrees (1) | |
| Front Bearing to Steering Knuckle Bolt | ||
| First Pass | 90 N.m | 66 lb ft |
| Final Pass | 60-75 Degrees (1) | |
| Front Stabilizer Shaft Insulator Clamp Bolt | ||
| First Pass | 22 N.m | 16 lb ft |
| Final Pass | 30-45 Degrees (1) | |
| Front Suspension Strut Mount Nut | 45 N.m | 33 lb ft |
| Front Suspension Strut Nut | 70 N.m | 52 lb ft |
| Front Suspension Support Bolt | ||
| First Pass | 60 N.m | 44 lb ft |
| Final Pass | 30-45 Degrees (1) | |
| Rear Control Arm Bushing to Control Arm | ||
| First Pass | 55 N.m | 41 lb ft |
| Second Pass | 45 Degrees | |
| Final Pass | 60 Degrees (1) | |
| Stabilizer Shaft Link to Strut Nut | 65 N.m (1) | 48 lb ft (1) |
| Stabilizer Shaft Link to Stabilizer Shaft Nut | 65 N.m (1) | 48 lb ft (1) |
| Steering Gear Outer Tie Rod to Steering Knuckle Nut | 35 N.m | 26 lb ft |
| Steering Knuckle to Strut Bolt and Nut | ||
| First Pass | 90 N.m | 66 lb ft |
| Final Pass | 60-75 Degrees (1) | |
| 1. Use NEW Fastener | ||